ONSHORE - VACANCIES - MALAYSIA

ONSHORE - VACANCIES - MALAYSIA

1.Senior Mechanical Engineer (Static) - Good Static + API 650 + little rotary
2.Senior Mechanical Engineer (Package) - Static + Good Rotary Package experiences is important.
3.Mechanical Engineer Static - API + Storage Tanks are very important + Pressure venterliser.
4.Project Manager
5.Senior Procurement Engineer
6.Senior Project Engineer
7.Senior Construction Engineer
8.Engineering Manager
9.Lead Discipline piping
10.Senior Process Engineer

http://www.linkedin.com/in/alexorhr

SENIOR PROCESS ENGINEER
Requirements:
Possess a recognized degree in Chemical Engineering/Petroleum Engineering with minimum 6 years working experience.
Knowledge in preparation of Process Flow Diagram (PFD) with material & energy balance.
Knowledge in preparation of Piping and Instrumentation Diagram (P&ID).
Knowledge in preparation of Data Sheets furnishing process data.
Able to conduct Hazop and perform process studies and optimization.
Experience in pre-commissioning and commissioning execution work (inclusive development of procedure and schedule).

QA/QC MANAGER - CIVIL MECHANICAL
Requirements:
Posses Degree in Civil/Building/Mechanical or other Engineering Field.
Minimum 10 years QA/QC working experience in QC Inspection work for Civil, Structure Infra Work and Mechanical/Tankage will be required.
Knowledge and exposure in design work for Civil&Structural and M&E work will be added advantage.
Knowledge in WPS,PQR,WPQT for Mechanical Work is mandatory required.
Well versed with BS Code, ASTM, MS Code and JKR Standard.
Have experience in construction quality control, QA/QC documentation requirement, Inspection Test Plan (ITP), Work Method Statement, testing requirements etc.
Huge exposure on ISO 9001 and experience in Oil & Gas Industry is preferred.

PROJECT/FIELD CONSTRUCTION ENGINEER
Experience in Project planning/scheduling, control and management, tendering, contract administration and project reporting.
Exposure to Plant Construction supervision and activities.
Exposure to relevant Government application and approval for the project being handled.
Capable to prepare project schedule in MS Project/ Primavera.
Exposure to Oil and Gas & Petrochemical is preferred.

ENGINEERING MANAGER
Minimum Requirements:
Degree / Diploma in any Engineering major, holding a position of Section Head and above
Minimum 5 years experience as EM, preferably in oil & gas industry
Primary Responsibilities:
Leads the project engineering team ensuring the design meets the project scope, schedule, HSE and quality requirements.
Assists in the selection of all Discipline Engineers and Lead Engineers for the project,
Monitors and controls the project engineering man-hour budget,
Directs the Discipline Engineers in the management of engineering projects, including the following :-
Planning the engineers' design, including defining scope, cost budgets, man-hour budgets, schedules, drawing control procedures, equipment procedures.
Coordinating the activities of all groups including the draftspersons.
Quality Responsibilities:
Manages all work for implementation, maintenance and improvement of the QMS within the project including Corrective and Preventive Action.
Reports to PM on all project matters.
Liaises with all Section Heads and Department Managers on all relevant engineering activities for projects under his supervision,

CONSTRUCTION MANAGER- 15,000 MYR
-Bachelor Science Degree in any Engineering Major, holding a position of Engineer and above or having experience more than 8 years.
-Handled Primavera Projects & EPC projects
-Oil & Gas Industry

PROJECT MANAGER
Oil & Gas Industry
-Degree in any Engineering major, holding a position of Section Head, Senior Engineer and above
Primary Responsibilities:
General
a)As a leader of the project task force team and represent CMSB in project execution and maintains official communication with the Client and other parties involved directly or indirectly for the Project.
b)Defines and understand project scope and objectives including Client’s Contract terms and condition stated in Contract Document.
c)Manage all project personnel matters and settles all problems concerning organization, function and assignment.
d)To approve any application for annual leave, outstation trip, claims etc. for those involves directly in the project and within project task force team.
e)Evaluation of staff’s performance and provide recommendation to PDM and GM
Project Execution
a) To ensure the overall project work execution are in accordance to relevant ISO 9001:2008 Working Procedure and Project Procedure and Quality Management System including Corrective and Preventive Action

SENIOR PROCESS ENGINEER
- Diploma/Degree in Chemical Engineering with minimum 6 years working experience
Primary Responsibilities:
a)Assist Section Head and supervise subordinates in ensuring smooth running activities in the department.
b)Prepare Engineering report and manpower forecast
c)Development of Process Flow Diagram and Utility Header Diagram as well as process design philosophy/design basis
d)Development of Piping & Instrumentation Diagram and capability to SmartPlant P&ID
e)Perform Mass and Heat balance calculation.
f)Prepare line list and equipment list
g)Prepare datasheet of the equipment
h)Prepare Cause and Effect Matrix
i)Prepare Design Basis Report, Hydraulic Report, Hazardous Area Classification Report etc
j)Process calculation:-
k)Familiarity of Code and Standard such as;
ASME B31.3,ASME B31.8,ANSI B16 & API Piping Material Codes and Standards
API such as 650, 610, 520, 521, 2000, 2210, 2350 etc
NFPA 20, 30, 58, 59 etc
l)Perform any task assigned by Section Head
Oil & Gas Industry

SENIOR PROCUREMENT/SUBCONTRACTING ENGINEER
Minimum Requirements:
Degree in Engineering or related fields with 5 years working experience or Diploma in Engineering or related fields with 7 years working experience.
Immediate Superior:
Section Head
Primary Responsibilities:
Ensure all procurement activities are conducted based on established procedures (SOP Compliance).
Prepare vendor/subcontractor list for bid packages.
Prepare procurement master schedule.
Review requisition received from Engineering Dept.
Finalise procurement /subcontract contractual terms.
Prepare inquiry document and send invitation to bidders
Receive, review and analyse vendor’s/ subcontractor’s quote.
Prepare clarification to vendor/subcontractor.
Prepare commercial bid evaluation and recommendation.
Conduct negotiation with vendor/subcontractor.
Prepare and review LOA/LOI and PO/Contract.
Monitor expediting activities and coordinate Factory Acceptance Test (FAT) before delivery for equipment.
Coordinate logistic and transportation for goods.
Invoice checking and verification and payment monitoring.
Tax exemption works and authority approval including MIDA, Customs, MITI and other agencies as required by project.
Vendor/subcontractor evaluation upon project completion.
Analysis of price/cost database.

PIPING ENGINEER / LEAD DISCIPLINE PIPING
Senior Engineer: Full Responsibility for Implementation of Job Description
Engineer: Check & Review by Senior Engineer for Implementation of Job Description
Junior Engineer: Assistance from Senior Engineer and/or Engineer for Implementation of Job Description
1) Primary Responsibilities
Understanding of Codes and Standards for Piping such as;ASME B31.3, B31.4 & B31.8 ASME B16 NACE
Establishment Piping Material Service Classes
Engineering Calculation for Establishment of Piping Material Classes
Thermal Stress Analysis
Preparation of Material Requisition including Preparation of MTO Summary
Technical Bid Evaluation of Piping Materials
Check and Review of Vendor Data
Preparation of Piping Work Requisition including Preparation Of Work Volume Summary
Check and Review of Piping Drawings
Piping Crush Checking
Preparation of Piping Test Package
Check and Review of Plot Plan
Check and Review of Design Information to Other Disciplines such as but not limited to;
Equipment Nozzle Orientation
Equipment Ladder and Platform Plan
Pipe Support Information for Equipment
Loading Data for Piperack and Pipe Support
Tank Dike Piping Penetration Plan
Piping Operation Platform
Underground piping for Cathodic Protection Design
Site Checking
Filed Work Supervising and Progress Control
Line Checking and Preparation of Punch List
Tendering Work
Preparation of Technical Proposal
Estimate Engineering M-H
Establishment of Engineering Schedule
Standardization of Piping Design
Others instructed by Company
2) Secondary Responsibilities
- Piping Design
- Pipe Support Design
- Preparation of Design Information to Other Disciplines for the above
- Piping Material MTO
- Piping Work Volume Calculation

SENIOR MECHANICAL ENGINEER (STATIC) - Good Static + API 650 + little rotary ( 7-10 years of work experiance in oil & gas Sector)

SENIOR MECHANICAL ENGINEER (PACKAGE) - Static + Good Rotary Package experiences is important. ( 7-10 years of work experiance in oil & gas Sector)

MECHANICAL ENGINEER STATIC - API + Storage Tanks are very important + Pressure venterliser.( 5-10 years of work experiance in oil & gas Sector)

Interested Applicants are requested to email us with their latest resume, including telephone number,email address, passport size photograph , current and expected salary , Notice Period to:

phita@alexor-my.com