Job Vacancies:
1) Scaffolding Inspector
Possess minimum Certificate of Scaffolding (Level 3) obtained from Construction Industry Development Board (CIDB) or equivalent and have experience executing scaffolding activities.
2) Designer
Possess minimum certificate in Engineering or equivalent qualification and have design/ drafting experience.
3) Draftman
Posses minimum certificate in Engineering or equivalent qualification and have relevant design/ drafting experience.
4)Structural Engineer
Possess minimum Degree in Civil Engineering discipline and have a experience in construction, structural or maintenance works in Oil & Gas Industry
5) Project Engineer
Possess minimum Degree in Civil Engineering discipline and have experience in construction, structural or maintenance works in Oil & Gas Industry
6) Project Manager
Possess minimum degree in any related Engineering discipline and have experience in construction, structural or maintenance works in Oil & Gas Industry.
7) Piping Inspector/Engineer
Qualification needed:
- Min 1 or 2 years experience
- Candidate must to have API 570 piping inspection certification (Please attach your valid certificate)
- Confined Space Entry Certificate (Optional)
8) NDT technician for A/B/C scan- Junior technician
Qualification needed:
- SPM
- 1 or 2 years experience in A/B/C Scan
- Must have ASNT Level1 (Please attach valid certificate)
9) NDT technician for A/B/C Scan-Senior technician
Qualification needed:
-SPM
-More than 3 years experience in A/B/C Scan
-Must have ASNT Level2 (Please attach valid certificate)
10) RBI Engineer
Qualification needed:
-Min 3 years experience in RBI
11) Corrosion Engineer
Qualification needed:
-Min 3 years experience in material and corrosion
12) Mechanical Engineer
Qualification needed:
-Min 3 years experience in heat exchanger/condenser/boiler cleaning and maintenance
-Confined Space Entry Certificate
-API 510 Pressure vessel inspector
Please submit resume and the required copy of certificates to nc@nuricerah.com
Welding Courses 1G/2G/4G/6G/6GTR (3GWC/4GWC/6GWC)
ReplyDeleteIntroduction
Welding plays a vital part in modern engineering, joining metals in factories, fabrication workshop and in a wide varieties of work on site for both shipyard and construction industries. Equip your staff with appropriate levels of competency and skills in welding operations to meet today’s job market and the challenges of tomorrow. Successful completion of this course (3G) will enable the workers from Malaysia to be eligible for the low levy scheme.
Course Content
The course contents are as follow:-
• Introduction to Welding
• Preparation for Safe Welding Operations
• Hazard Involved in Welding
• Personal Protective Equipment-General Introduction
• Practical Training
• Practical Assessment
Basic welding low-levy test certified by Bureau Veritas
1. SMAW-3G (10mm) Plate
Up-grading welding tests certified by American Bureau of Shipping (ABS)
SMAW-3G (10mm to 25mm) Plate
SMAW-4G (25mm) Plate
SMAW-6G (6”-8”) Pipe
SMAW-6GR
FCAW-3G (12mm to25mm) Plate7 . GTAW-6G (2”) Pipe
GTAW/SMAW-6G (2’to3’ S.S Pipe)
Entry Requirement
• Must be over 18 years of age
• Must be physically and mentally fit for the training
• No problem with eyesight
Upon successful completion candidate will be issued with a Welding Certificate by the Class surveyor.
For Malaysian/Foreign Worker- Obtain the above welding certificate in one or two days to apply for work permit this certificate witnessed by 3rd party approved by Ministry Of Manpower Singapore(MOM) may use for lower levy.
We undertake to offer you the best rates and the shortest time to qualify your workers.
Enquires,please contact us.
Terence +6598308352
sm2489@singnet.com.sg
Sathya +60167214721
thenameissrk@gmail.com
Welding Courses 1G/2G/4G/6G/6GTR (3GWC/4GWC/6GWC)
ReplyDeleteIntroduction
Welding plays a vital part in modern engineering, joining metals in factories, fabrication workshop and in a wide varieties of work on site for both shipyard and construction industries. Equip your staff with appropriate levels of competency and skills in welding operations to meet today’s job market and the challenges of tomorrow. Successful completion of this course (3G) will enable the workers from Malaysia to be eligible for the low levy scheme.
Course Content
The course contents are as follow:-
• Introduction to Welding
• Preparation for Safe Welding Operations
• Hazard Involved in Welding
• Personal Protective Equipment-General Introduction
• Practical Training
• Practical Assessment
Basic welding low-levy test certified by Bureau Veritas
1. SMAW-3G (10mm) Plate
Up-grading welding tests certified by American Bureau of Shipping (ABS)
SMAW-3G (10mm to 25mm) Plate
SMAW-4G (25mm) Plate
SMAW-6G (6”-8”) Pipe
SMAW-6GR
FCAW-3G (12mm to25mm) Plate7 . GTAW-6G (2”) Pipe
GTAW/SMAW-6G (2’to3’ S.S Pipe)
Entry Requirement
• Must be over 18 years of age
• Must be physically and mentally fit for the training
• No problem with eyesight
Upon successful completion candidate will be issued with a Welding Certificate by the Class surveyor.
For Malaysian/Foreign Worker- Obtain the above welding certificate in one or two days to apply for work permit this certificate witnessed by 3rd party approved by Ministry Of Manpower Singapore(MOM) may use for lower levy.
We undertake to offer you the best rates and the shortest time to qualify your workers.
Enquires,please contact us.
Terence +6598308352
sm2489@singnet.com.sg
Sathya +60167214721
thenameissrk@gmail.com
Any vacancy for rigging foreman
ReplyDelete